Planar Dome E4c Manual do Utilizador

Dome E4c DisplayUser’s GuideMX4 Display Controllermx4.book Page i Wednesday, August 9, 2006 3:03 PM

2 | Dome E4c DisplayDisplay statusThe Dome E4c display has a light-emitting diode, or LED, on the front panel to indicate display status. • Green.

About the Display | 3Display powerThe power input port is an 8-pin DIN connector that drives power to the display. See page 17 for the pin assignm

4 | Dome E4c DisplayDisplay standAlways grasp the sides of the display to adjust the viewing angle, tilt, and height of the screen. NOTE: To unloc

About the Display | 5Swivel the screen left or right to adjust the viewing angle.Push the screen backward or pull it forward to adjust the tilt.Sl

6 | Dome E4c DisplayDisplay InstallationBefore you install the MX4 graphics display controller, remove any existing graphics board and its driver

Display Installation | 7To install the graphics board and display1 Remove the computer cover and the blank bracket from the available PCI slot.2 I

8 | Dome E4c DisplayRemove the computer cover and the PCI bracket.Install the graphics board and reattach the cover.Connect the power adapter cord

Display Installation | 9To install the display driverBefore you install the driver, remove any previously installed display driver from your syste

10 | Dome E4c DisplayTo configure the display1 Right-click the desktop and select Properties > Settings.2 Use the native resolution of the disp

Display Installation | 11To change video setting per display1 Click the PowerDesk icon on the taskbar.2 On the PowerDesk menu, select the graphics

© 2006 Planar Systems, Inc. All rights reserved.Information in this document has been carefully checked for accuracy; however, no guarantee is given t

12 | Dome E4c DisplayTo install Dome CXtraBundled with the display system, the Dome CXtra software enhances the functionality of the Dome E4c disp

Display Installation | 13Options availableThe following options are available for the Dome E4c display. • VESA (100 mm x 200 mm) wall-mounting kit

14 | Dome E4c DisplayTroubleshootingProblem Possible Cause SolutionDisplay does not light up. Power is not on. Make sure that the computer is turn

Specification | 15SpecificationIn locations where 240V outlets are used, connect the Dome E4c display only to a center-tapped, 240V, single-phase

16 | Dome E4c DisplayPower supplyCAUTION: Use only the power adapter supplied with the Dome E4c display unit (JEC Korea Corporation, Type JMW1150K

Specification | 17Connector portsThe power input port is an 8-pin DIN connector. The power input is 24V ±5% (115 W typical). Pin assignment of DI

18 | Dome E4c DisplayDesktop standUnfasten the stand lock when necessary to adjust display height. Move the lever to the left to unlock the stand

Regulatory ComplianceCanada, European Union, United StatesThis display has been tested and found to comply with IEC/EN 60601-1 and IEC/EN 60601-1-2 st

The applicable safety standards for an MDD Class I display are IEC/EN 60601-1:1990 along with Amendments 1 and 2. To help the medical device designer

EU Declaration of Conformity for Medical ApplicationA Declaration of Conformity has been filed for this product. For additional copies of the Declarat

Product InformationThe design of the Dome E4c digital display takes into account every known measure to ensure your personal safety. Improper use of t

U.S. FCC Compliance StatementDisplay Unit This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1)

AustralianChina JapanKoreaTaiwanAustralian Communications Authority regulating product EMC compliance. China Compulsory Certification regulating safet

Standard WarrantySummary• Standard one-year “repair-and-return” warranty•Two-year backlight warranty*• Typical repair turnaround time of 10 business d

Summary Limitations and Exclusions of Dome Displays1 Customer must provide original proof of purchase of the display system.2 Warranty is void on any

America SalesPlanar Systems, Inc. 1195 NW Compton Drive Beaverton, OR 97006-1992 USA (503) 748-1100 phone(503) 748-1493 faxMedical SalesPlanar Systems

iv | Dome E4c DisplaySymbol explanationsDISPOSAL. Do not use household or municipal waste collection services for disposal of electrical and elect

Product Information | vIntended useThe Dome E4c display is an AMLCD unit designed for viewing medical X-ray images. This unit should not be used nea

vi | Dome E4c DisplayShipping/storing the displayKeep the display in its shipping container until installation. Return the display to its original

Product Information | viiUnpacking and handling tipsThe Dome E4c display is a precision instrument that requires proper care to maintain adherence t

Options available: VESA wall-mounting kit and Dome Surgery Review Cart. See page 13 for more information.AMLCD panel mounted on desk standGraphics dis

About the DisplayThe Dome E4c display is a 30-inch AMLCD color panel designed for widescreen diagnostic imaging. The combination of high resolution an